free web counters FM Transmitter Index
We have been offering an affordable kit FM Stereo transmitter for the last +5 years. We recently added our high performance LCD series transmitter to the product list. Our transmitters are very reliable and comes with a standard 2 year warranty

CUSTOMER FEEDBACK

(Most recent - bottom of page)

Hi

Just a note, the 10 mw FM house transmitter is just
right.  Clear audio with coverage of the entire house
and even the yard.

Where I live in the narrows of Sybille Canyon, FM
reception is not possible.  I put a yagi antenna at
the top of the mountain, brought down 650 feet of RG59
coax with an inline 20 dB amp to a Radio Shack
receiver in the garage (see pictures).  The
recorder output feeds into the house transmitter, so
now I can pick up KUWR (on 88.7) in all the rooms of
the house.

Thanks for such a nice product.

Larry Dean

 

image6smallmount

Dear EDM:

I have been testing the Stereo FM Transmitter module for the past several days.  It sounds
great and really gets out!  It's a great little unit.

Regards, Chris

Hi,

Received the transmitters quickly, thanks for the prompt shipment. It seemed to work very well for the little testing that I did.

J.J

Hi EDM,

I had a nice smile on my face when I came home from lunch for the car radio picked up the signal a few blocks from the house.  If fact, I drove around the whole neighborhood and it was able to pick it up.

Great FM Transmitter, Good Clear Stereo Sound.
David

You are FAST! I received the transmitter in the mail today (Monday). .

I went to RS and bought their 3A regulated P.S. Took a F to RCA fitting
and hooked up my Ramsey TM-100. Attached a CD changer.

Your unit is everything you advertised and more. I can't believe that a
unit that small does what it does, and so well.

You get a thumbs up and an A+ from me!

Mike Bugaj

I started with VCOs back in the 1980's, so this little synthesized jewel is a real joy
compared to those bad old tweak stick'n coil squeeze'n days, let me tell you!
The more I use this little stereo transmitter the more it amazes me.

Really fun product, Thanks again!

Howdy again,

Haven't decided on a power supply, yet, but tested your transmitter unit with
batteries and it works great!

Thanks ..... Skip

My friend recently bought the 100 mw version from you and is loaning it to me.  I am simulcasting my AM station on it as we speak and it sounds great!………

Dean O'Neal

Transmitters received. I haven't hooked them up but they look fantastic….

Why are you guys building these transmitters? Are you building stealth fighter AMRAM pods on your real job and having fun on the side with these to keep the labor crew busy at night?

Anyway, congrats from an Extra class ham operator. Good work.

Gene Seville

Hi EDM,

Just a follow up message to let you know that I have tested, and made a
small cabinet, for the transmitter module, and am VERY pleased with the quality of
transmission.

Have a World Space Receiver ( Satellite ) which will only work in one corner
of one room, and have now connected this transmitter so that I can now
receive over my Home Theater System.WOW, what a difference this makes. The
bonus is that I can now have the same music in any room in the house via a
cheap FM radio.

Thanks for a great product, with even greater service…

Regards,

Ady [Bombay]

Hello.
Received the transmitter at Disney and it's already installed and working very well. I will be doing tests on it for the next few weeks and will let you know how it works out.
Thanks Paul...

[This transmitter unit was installed on a roller-coaster! - EDM]

I am very pleased with the stereo transmitter, it's exactly what I was
looking for. Good quality, small, easy to tune, and a good price. Feel free
to use me as a reference on your web site.

Thanks,

Doug Melton

As of this moment, the transmitter is running, I am
playing a CD and you did a hell of a job on these, the
audio quality is better than some of the local FM
stations, and the coverage with the antenna that comes
with it is great, good job...I am excited!!!
Thanks a lot for your help, I just can't believe how
great the audio sounds!!!

Josh.

Hi, received the transmitter yesterday and it works great. Thanks!

Brian Duke

I got my EDM back in March and it has been in service 24/7 ever since. No problems at all to report. From my own experience I can tell you that the EDM sounds great, the stereo separation is terrific and tuning is a breeze (no multiple dip switch settings to mess with).

Dean Chapman

I just got a FM transmitter, a few people suggested the EDM FM transmitter: http://home.global.co.za/~edm1/ audio is great, it is not all compressed or processed like on the regular FM stations, but it sounds clear, I suppose if you want the sound of the big guys then get a processor. EDM who makes them responds to your emails very quick and does a good job with support.

So if you need a better transmitter or first one or whatever, consider the EDM one. Its also digital tuning, also, so no drift.

I run mine on Fridays and Saturday 9am-10pm, Frequency stays in place no problems or anything, only thing I don't like, which is normal is the transmitter does get hot, not hot enough to burn but hot. You will need to get a metal enclosure.

So with all this Oldies 103.5 and 1700 are on the air in Cambria.

Re: Synthesized Stereo FM Transmitter

Thanks again for the great assistance, fast turnaround and excellent product support!

Cougar Kev

Greetings!

The 100mw order arrived and I have tested it satisfactorily. I will need to get a regulated power supply to get rid of the hum, but the range is easily 500 meters.

Greetings once again!

I have returned to Germany...settled on a small steel "petty cash box" which does the trick nicely... the unit works very well with no hum at all, once positioned inside the box.

I am pleased to report that your 100mw unit performed in an outstanding manner at an 8 day convention where we provided simultaneous translation into German or English (depending on which language the speaker used) via FM receivers. The signal was clear and conference attendees from previous years remarked how easy it was to use a mini FM receiver rather than the infra-red system we had used in past years. We had been assigned the frequency 99.5 Mhz by the German telecommunications office.

I would also like to order a 10mw unit...

Best regards,

Paul Kieffer
http://www.ucog.org/

Added: Nov, 2007

Greetings!

Yes, I received the two units (EDM-TX-LCD-EP) in good condition and they work fine. People commented that the signal was clearer using these units. We have the mono unit since we transmit only speech for simultaneous translations between languages.

-- Paul

Hello

We received the EDM 100mW that you posted to us eventually and it is working very well. We would like to make another purchase for two transmitters. Is the bank information still the same?

Best of Regards
Solofo

Operations staff - Radio Nederland (Madagascar Island - Relay Station)

Thank you for your consideration and support with this issue.

It is obvious that I created the problem and I truly appreciate the effort that you put into repairing this unit.

Thank you!

Kirt Amos

I have ordered this product from you before and was very pleased. I need 3 additional 10mw stereo fm transmitters. Is it possible to have these delivered to me by Monday.... Do you have any suggestions on this? Please Call.

Julio Escobedo

Got it thanks, works very well.

Capt. Robert K. Henkel

Hi EDM

Received the unit. Made a quick enclosure for the Transmitter module with thin gauge aluminum sheet metal, a pair of tin snips and some other basic tools. Took no more than 30 minutes.

box

Works 100%, no hum -clear signal!

Thanks, Ronald

Hi EDM

I received my unit this past Friday and
I am very happy with it. My house is quite large and
all of the other units I tryed would have noise and
dead spots in various parts of my house.I get a clear
signal every place in the house and more..

I really love the unit.The build quality is awesome with the digital
readout. Sometimes I have it on 16 hours a day hooked
up to my digital cable box with its 50 channels of
commercial free music...

Best regards

Jim Reynolds

http://groups.yahoo.com/group/Technical_Insanity/message/1961

music is stored locally on the show PC in MP3 format and links seamlessly
via the software to the animation sequences. The music is broadcast on
99.3FM via an LPFM transmitter from http://edmdesign.com/ this is an awesome
little unit and has performed well beyond my expectations for the price!

Hello there.  Today I received my transmitter in the mail today, and immediately had a good time transmitting.  I constructed an aluminum case for it, as well as a 1/4 wave antenna.  I transmitted my favorite music from my place, and found that I was still able to hear it 1/2 mile away from my house in a heavy residential area of town!  Most impressive, especially when the antenna was inside my place, broadcasting throughout the neighborhood without a good line of sight.  I have included a picture of the transmitter inside the case that was constructed for it.

tx case

Hi

i just received the unit this morning, it takes 3 hours to replace my old xmitter board, i really like the performance,

Regards, Charlemagne Apache

Hi Folks
Just wanted to write and tell you how happy I am with
your unit.The stereo sound quality is so good that it
is almost scary.Sometimes its hard to tell if its a
commercial station I am listening to or my little EDM unit.Anyway I just wanted to let you know how much I
appreciate your unit.

Hey guys!

 

The new transmitter arrived today, and I cautiously proceeded to complete and install it into the implement box...

 

Just want to thank you all again for such great support and I look forward to doing business with you again.. I have friends raising eyebrows now....

 

Steve Francis


Thank you for the help, all is working well now...Great little unit...

Jim Guidi

The EDM transmitter is outstanding in design and performance, it's size and easy set up make it by far the best transmitter in its class. The metal case is also a stand out in that it can easily be mounted on a wall or laid on a table, and it's compact size and 12 VDC operation means it can be operated anywhere. I will be using mine as part of a Radio Station in a Brief Case for a Talking Sign and Special Events business. I plan on ordering many more as I can think of many uses including: broadcasting a satellite program around the ranch or very low power translator. If anyone has any questions about the transmitter feel free to have them contact me anytime.

    Thanks again for an outstanding product & service.

Steve

My fm transmitter arrived when you said it would.
I am very happy with it. It produces a good clear
stereo signal and has very good range.

I am so pleased, I have just ordered 2 more units

John

Dear EDM:

The transmitter shipment arrived intact this afternoon.  It is up and operating right now.  Sounds great!

My neighbors have been enjoying tuning in.  I have over 2000 "classic rock" hit titles on a CD jukebox that feeds the unit

Best, Chris

I just got the tx, plugged it in, ran a mismatched (only slightly)
dipole from it - nice sound :)  Very nice actually.

Rick

Hello, I just got the transmiter now! I love it! extremley fast shipping.
This is even better then what I thought it would be, I love it. thanks so
much

James


I recently purchased a EDM transmitter.Yes, I am testing it this evening.This is FM stereo for a killer affordable price that is absoulutely unreal ....

Carl


Hello, guess what, today i went to the postal office here in Romania and got the transmitter..as soon as i got home...quick assemble, simply amazing, works unbelivable....clean sound...it even sounds better than direct form the computer :-) great L/R separation, high frecuencyes sound great , and stability, easy to use and small, so small and so smart, thank you people for this!

Regards, Mihai(now On Air)dipoleon air

Another happy South-African here!

Hi, I received the transmitter shipment today

 

I have been experimenting with it all day, and am very impressed with its sound quality and range. I tuned it into 107.1, which was a clear station and the quality was excellent. I could even hear the stereo and excellent base on the car speakers. I especially like the green readout, and how it is spot-on with the frequency. I shall keep you updated when I do more testing. I am very pleased. Thanks for making such a cool product.

 

Best Regards,

Ray

Overall, I have been very happy with the value vs. performance of this unit

Thanks, S Harrison

Your Unit Should Have Some Award!

I have looked at A lot of other small fm
transmitters on the internet and they seem to be quite
large in comparrison to yours.Its hard for me to
believe that you were able to design such a awesome
sounding unit in such a small space for such a
attractive price. If you have any would be
customers that wonder how good your unit performs and
sounds you may have them email me and I would give
then nothing but glowing reports.(email available on request -EDM)

To Whom It May Concern:

I put the transmitter together this morning and it works great!  I can’t believe how well it works, and such a small package. 

You have truly created a great product.  My hats off to the engineers. 

Happy Holidays! 

Best regards, S Hepler

Sorry for the confusion ... but our snail mail delivered the package today.  Again...thanks for a great product.  ...Max

I have just received your EDM-TX-10

It is fantastic - very quick delivery,easy to follow instructions and (most importantly) awesome quality.

I would recommend you with total confidence.

Thanks

Tony

Sydney, Australia
-----------------------------

Hi I recently bought from you a TX-10EP (with the box but without the PSU) and it is awesome

I am now about to order a TX100EP

For interest I did a small adjustment to your case - adding a slide swith to the left of the power input socket - it is the only thing missing from a very well thought out design.

cheers

Tony

..However, my last TX I bought was the EDM100mw....before I go... I must say..this TX is the best... I am glad to wrap up my Hobby..by saying this TX made it all worth while...however,I will miss this Hobby all because of this unit... read full story here

Thanks very much for your info.

I made the pad. After some adjustments of the TX I now get great sound from my mp3 player. Thank you for good support. 

 

Regards

Sören -Sweden

EDM, 

The transmitter arrived safe and sound back to me today. Thank You for such fast work! I am really glad that it has been fixed.I will keep in mind about what you said and such.

Awesome company! My hat is off to you all!

Also, you can use this email on your site if you would like. AAAAA++++++

Thanks Again So Much EDM!


Hi EDM Team...
Just wanted to let you know i received my EDM-TX-100EP a few weeks ago.
And i couldnt be happer. It works perfect,great sound
quality,transmission range. I mounted the unit inside a dvd player and
use it at work as we cannot receive radio stations inside our building.
Haveing 4.5 gigs of
mp3s is great...
Thanks again  Jay

Will you have any more units available in the near future?

--- In The_Radio_and_Transmitter_Electronics@yahoogroups.com---<tunerwiz@... wrote: Members, For some time now I am looking for a really good and affordable low power stereo transmitter to use in my home. Names like Ramsey, Crane etc. popped up. Read all the reviews I could find - but still I am not convinced. Also no real technical details from the great names. Lately I was pointed to http://www.edmdesign.com Loads of technical information. Have any of you used their stuff before? Any advice appreciated.

>> I have had the Crane style junk and the Ramsey garbage. I bought the EDM and it far outclasses anything I have ever seen short of a commercial exciter. It does what he says it does,no hype,no surprises,solid as a rock and a 2 year warranty to boot! I am extremely happy with my EDM10B and plan to buy more. Cant beat the price either!

Later...Lee,Wilcom Labs

Hi -

A few months ago I purchased about 17 transmitters from you - am very happy
with their performance.  I have a large project coming up very soon and would
like to purchase an additional amount. I might be able to purchase somewhere between 15-30 transmitters from you.

Thanks,
James

Good Day,

I want to leave my comment on your EDM-TX-100EP transmitter. I've owned many FM transmitters, some quite good, some garbage, but the EDM-TX-100EP is the best I've ever owned. It was easy to put together, well written instructions, Nice bright easy to read display, and a top performer! My signal sounds as good as the other FM stations in town. I've had it in service for over a month, and never had a lick of trouble with it, not one problem. Of course, I'll keep you updated.  I'm ordering another EDM-TX-100EP to place in the car, and you'll bet I'll stick with EDM Design for all my future transmitter needs! Just keep making top notch products for all to enjoy.

Yours Truly,

M.W. Shannon

Greetings,

I'm not just a satisfied user of your product, I am also a webmaster on a low power radio site that pulled
2.5 million visits last year :-)

http://www.part15.us

We all love your transmitters - see our review here:

http://part15.us/node/708

or discussion thread here

http://part15.us/node/729

 

Hi

I received my unit (EDM-TX-LCD) last thursday and have been running it through its paces. It's a great little unit. Very well made. The signal is very clear and so far I am much impressed.

I really like the unit. Its much more flexible in that I don't have to take the cover off to make changes. It sounds awesome. These units are really well made. I will be writing a positive review of my experiences with it on the Sat Radio forum board. I'm sure your products will be of interest to them as they are so much more advanced than what it presently available. The quality and versatility of your products are unmatched by any.

Best Regards,

Darnell

EDM-LCD-TX review

Hi

I can see now why you guys get so much positive mail. I was a bit leery of floating my hard earned money to South Africa all the way from Canada, to a company I’d never heard of and one which didn’t  show up in any related North American sites. Plus I’ve also bought other kits in past and been less than impressed overall.  

But I am delighted to say that you guys make the best damn low-power FM transmitter available, hands down, anywhere. Compact, easy to use, and rock-solid clear sound with virtually no noise.  

I bought the 10/100 mW unit in the enclosure with PS etc. This thing is absolutely great. I most heartily recommend your product to anyone looking for a transmitter for personal or private applications. I use it to broadcast streaming audio from the Internet, or sometimes I’ll re-broadcast a feed from my Sirius satellite radio. Then I can putter around the house listening from various radios tuned to my frequency, or wear a portable receiver and headphones. 

Thank you very much for being so good at what you do.  

Warmest regards,   

Brian Kellett

North Vancouver, BC

Canada

Good Day!

 Here is another comment that you can use. (After 1 year)

 After a year of constant use, the EDM TX-100-EP has been nothing less then a workhorse. It's have given no problems whatsoever. Never have to worry about it drifting off frequency, no problems with interference with TV or Radio, no fear of it going off air for no reason at all. It's a good sound design in construction. Audio is wonderful as well. Like I'd stated before, it sound as good as the other FM stations on the dial.

  I was so impressed by EDM's quality, I got another transmitter, the EDM TX-110-EP. This transmitter was to be a mobile unit, but it was quickly turned into a satellite station to my main station. A satellite station 70 miles from the home station. The comments I've gotten from listeners regarding the audio quality is very positive. The only trouble I have is keeping the Internet connection running, but I don't have to worry about the transmitter resetting itself.

  I'll say it again, I will buy another EDM transmitter in a heartbeat! Planning another satellite station about 300 miles from the main studios sometime this winter. I'm buying EDM for the quality construction, reliability, and clean audio output. 

Thanks again for a great product!

M.W. Shannon

Hello to all readers. A few days ago i went to my friend`s local radio
station where they got all the professional equipment for FM
broadcasting. What interested me was they`r IDT digital band processor,
from wich the main transmitter gets the processed sound. So i put my
little edm transmitter on the sound processor and got very amazed when
i noticed that was no difference between their transmitter and mine.
For those who want the recording and some photos you can find it at:
http://www.cpai.ro/js/edm.html

I've got the system tuned and broadcasting - good signal and a breeze to install. I'd recommend the system to anyone with a suitable application. Feel free to include this recommendation on your website.

Sincerely

Steve

Hi EDM Folks
Its been a while since I have written to you. Coming up in November of this year my unit will be 3 years old and still working great. .........................................................
I think it is truly amazing that you have a 2 year warranty which I am sure is the first of its kind for a kit. Many thanks for making such a great very affordable unit.

                                Jim
                  Golden Valley, Minnesota (Letter shortened - EDM)

Posted in http://www.radio-info.com

I have tested the FMX and the EDM side by side; The FMX is like a Yugo and the EDM is like a Toyota...

The EDM transmitter is an outstanding value when compared to Ramsey and others.  Low harmonics and spurious emissions will reduce the chance of a visit from the FCC...

For the money the EDM is the best transmitter in regards to sound quality, signal quality & inovative design when compared to Panaxis & Ramsey...

For those who want to set up a part 15 FM station on a budget, I suggest the EDM transmitter and a Behringer UB802 or the older MX 602 mini mixer. Both include 2 XLR mic inputs and 2 stereo inputs all inputs include 3 band EQ, aux send which can be had for under $60 retail. Total cost $187 compare that to a Ramsey 100B kit priced around $269...

www.radiooutlaw.com

hello

transmitter arrived today (EDM-TX-LCD)
wow its range and audio is great
you have made a great product fast shipping.
i can pick it up all over the neighborhood!
thanks for the fast shipping

Tim,
Australia

Hi

I took the plunge and upgraded to your latest LCD series with enclosure. My old EDM 10/100 is still doing great after 3 years! 

I just want to let you know that the LCD model is a sure winner. No audible noise between music tracks and awesome audio. I can definitely hear the difference between the old and new. I like the transmit power control. Even that this model is more expensive, I am not disappointed.

Regards Ruan

http://www.misuse.org/science/2007/10/15/hi-fi-not-wi-fi/#more-83

Frequency modulation instead of network stacks turns out to be a pretty cost effective way of getting your house set up for internet radio/streaming. I recently purchased this device which is a low power FM transmitter built by a company in South Africa called EDM Design.

After minor assembly, I plugged it into an 3.5mm to RCA cable that (with a rheostat to manually adjust line volume) and I’m on the air with RadioScience. I can broadcast any stream to all the radio receivers in my house, which is a lot cheaper than buying these Wi-fi kits for sending streams to stereos. Plus if I want to add another station, I just get another FM receiver which is hardly a cost at all. Sound transmission is good, though you’ll want to play with the volume/transmit adjustments inside the device after you pick which frequency your home-brew station is going to use.

I purchased a EDM-TX-10EP from you about 6 months ago and love it. I
have a friend that I'd like to give it to, and therefore upgrade myself. So I'm interested in your new model EDM-TX-LCD-EP....

Thanks for selling such a great product at a reasonable price. I have
friends who have paid thousands for "wireless home entertainment" and
have inferior sound and capability to what I can do with your simple
radio transmitters.

Sincerely and happy holidays,

S. Midgley

Here is a testament for your website.

As you know I have two of your transmitters on air,
one has been on the air non stop for three years 24/7
until yesterday when rain leaked in and soaked the
circut board taking it off the air. I thought it was
finished! I dried it out with a air gun, and then with
a heat gun, powered it back up and it came right back
to life like nothing happened. EDM transmitters power
the only two FM radio stations that can be clearly
received here, a thousand plus listeners depend on
them for all their programming.

From: Radio Brandy Staff

To whom it may concern, (EDM LCD Transmitter) 

I received my transmitter on Friday and got to play with it some this weekend. I hooked it up to the zone 2 output on my home theater receiver. This outputs the audio from any device connected to my receiver to the transmitter. One of my devices is a XBOX 360 that I use as a media center extender. This means I can also play any music files located on my pc. I had some trouble with noise and some crackling (mostly on the right channel) but I found that this was because the wire antenna was near so many power cables. I mounted a homemade slim jim antenna tuned for my frequency in the attic and ran RG58 to it. The noise and crackling are gone and to my non-audiophile ears it sounds perfect. Even with the antenna mounted at an angle (my attic was not tall enough to stand it up) I am transmitting clearly about a ¼ mile radius. I need to turn down the rf output but then my setup will be complete. I will use it this way for watching tv and playing xbox without disturbing the babies or the wife and listening to my mp3’s when I’m out in the yard. During Christmas I will use it to broadcast the music for my synchronized light display.

Thanks for such a quality product that delivers on it promises.

This is my third transmitter (first EDM) and the others sounded like toys in comparison.

This thing sounds as good as a commercial station. Please feel free to use this on your website.

I have used a Belkin Tunecast and two transmitters from a Chinese company that sells on eBay. They were 1W and 5W

The highs and lows on these units were distorted and there was a fair amount of noise no matter what I tried.

They had a lot of good feedback on eBay but I guess that means nothing. I am glad I chose the EDM transmitter, it was that or the Ramsey 30b and even though I have a degree in Electronic Engineering I wasn’t looking forward to putting it together after paying so much for it. I guess it’s like a mechanic not wanting to work on cars on his free time. The main reason I chose the EDM is you guys are the only ones who list detailed specs and test results as well as having good customer feedback.

Best Regards,

Tim Harrison

Note: (All EDM kits require some assembly and soldering. - EDM sales)

From: Posted in Yahoo's Radio-Transmitter Group

I have used the EDM unit for over 3 years at 16 hours per day and the unit performs just like a commercial fm station.In fact sometimes I can't tell any difference compared to those 100 KW stations. I talked to the folks at EDM and they have built in a very mild comp. limiter that works fantastic. The email responses are next day and the sound quality of this unit is awesome.

Jim Reynolds Custom Recording Studios (Mpls. Mn.) www.customrecordingstudios.com

Hi,

I received the unit and I'm enhance of the results. Thank you and congradulations.

Thank you.

Daniel R.

"don't forget the new EDM is the Rolls Royce of low power transmitters"

"I have had many transmitters in my life dating back to 1976, As a radio station owner I can tell you I'm very impressed with the EDM (LCD), I compare it to our $5000 exciter in sound quality and still amazed how they do it in such a small package".

Steve
http://www.KNJORADIO.com

Wow!

I just finished connecting the cables and powered it up in my downstairs living room. I checked out all of the radios in the house and it was static-free on all of them. Previously, my upstairs bedroom clock radio had reception issues with my Starmate....

Next, I decided to give it the walk test, so I took my portable cheap radio and headed out for a walk. The signal was very listenable up to 10 units away, which is about half way down the block - that is twice as far as the old Starmate Replay signal went.

While I cannot compare it to the Whole House or any other external transmitters, I can say that it freakin works and then some. Forget whole house, this EDM could be called "Whole Block." If anyone wants to send anything throughout their home, this will more than do the trick.

Fred. W

I got it hooked up in ~20 minutes and it works great!!

I'm impressed at the range of this thing (LCD model), even on the
base 10mW setting.


Scott

Thanks for your quick and helpful answer.  Your service and support is simply phenomenal!

Thanks again!

--Alan Thomas

This transmitter is the BOMB!
I've owned three other brands and they are all horrible transmitters.
I think I'm going to order another one.

rsbuffalo

Hey there,

Took me about 15min to assemble the LCD kit. Instructions were easy to follow.
The most challenging part for me was the soldering as this was my first time!
It all worked out well and I now can enjoy my music anywhere in my house.

Jerry

hi,
    i'm an old user of your edm tx 100. Here are some photo's of:

wca kiss fm 90.3-legazpi albay, philippines
wlm 90.3 kiss fm sto. domingo national high school, albay, philippines

almost 4 years of continous operation, and planning to purchase another two transmitter this year.
                               thanks and more power.
                               CHARLEMAGNE LL. APACHE



Just received my order in Canada (May 15). I'm happy

As I have things set up it has exceeded my expectations.  I have assembled and used Ramsey products with reasonable results.  I was currently running an AAREFF 50mw stereo transmitter.  The sound was good on the aareff, but the tuning was a pain.  The EDM-TX-LCD outperforms anything I have used to date. Can't say enough about the quality of the transmission.

Thanks again EDM for the awesome product
----
exdirtfarmer

(Letter shortened - EDM)

I just got my EDM-TX-LCD-EP recently. WOW!!! It's great!
I'm using the supplied antenna and the quality is 1000 times (or
more) better than the last transmitter I tried.

Fred

I'm up and running - I posted this response in Light O'Rama:
 
http://lightorama.mywowbb.com/forum25/16201-3.html
 
Thanks for the great unit - sounding awesome!!!

"I thought EDM's LCD was hype..but I'm a believer now!"

Lance

http://forums.sonos.com/showthread.php?t=10068

The EDM FM transmitter is excellent, better than anything I have used to date including Ramsey/Veronica kits/ccrane or those pathetic transmitters in the satellite radios.

Hello,
         This is really a great product. Now the wife can listen to her satellite TV in the house and garden in super stereo quality. I'm very tempted to buy another EDM-TX-LCD-EP for myself.

                    Well done and thanks for the great service.

                                   John in Belgium.

PS You can use this on your site if you like
******************************************************

Hello EDM Team,

                           Just ordered another TX as I was so impressed with the first which was a present to my wife.

My husband took literally twenty minutes to get the unit up and running with your instructions. We are novices with a soldering iron and there was not a bit of trouble. We had to only change the fm frequency, no changing any other settings and now we can hear our satellite radio station throughout our acre property with a small fm radio. The sound is better on the actual satellite radio unit with the EDM-TX-LCD-EP we bought from you than it was before on it's own.  Now I plan on buying my husband a headphone fm unit and he will be able to  listen to radio while mowing the grass. We will be able to enjoy our satellite radio outdoors and throughout the house without buying another satellite radio unit. The fm transmitter we bought from you even transmits to our basement. My husband stated "I'm impressed" and I am very satisfied. I researched other fm transmitter units such as Ramsey and Whole House transmitter before I settled on buying your unit. What convinced me was your knowledgeable customers glowing recommendations. You may add me to that list. You make a very well thought out, cost effective fm transmitter. Other fm transmitter companies should be jealous of your product and your customer service. Thank you!
You may use this testimonial.

Dave and Susan Powers

By the way, I'm another satisfied EDM customer.  I've been involved in the micro-broacasting hobby since 2000 and I've never had a finer transmitter (I've used Ramsey and PCS Electornics products). EDM proves that GOOD THINGS REALLY DO COME IN SMALL PACKAGES!

Just a quick addendum:  when it comes to customer service, there's nobody better!  You guys always respond quickly and thoroughly to any inquiries.

Rich

Very awesome product, very satisfied customer

I am extremely impressed with your transmitter. I have spent the past
month researching different antenna options and found a way to make one
from a friend and now that I have good reception I cannot believe the
quality that the transmitter transmits. I was actually thumping the
bass, very very good quality. Just wanted to post a good review.

<dizy**isy**@yahoo.com>

From: <******stylin2003@yahoo.com>

The EDM LCD is hands down the best sounding micro transmitter today.

Good Morning / Evening EDM Team,

I would like to thank Scott for bring your names to the TOP of the market of transmitters. And all of you hard work and support.  I have talked to several other people who have raved about your produce even before the received it.

I original purchased the EDM LCD unit as my backup but after the head to head (http://www.flowermoundchristmas.com/index.php/fm30bvedm)
and physical touching the unit.  I can tell you it will be my primary!!!  I was VERY impressed with how solid they were built and how much of a night and day difference it was on the Ramsey (Ignoring the Hum).

H. Ward

Letter shortened.

got my edm-lcd today, very nice

wow, the stereo sound was so clear and i cannot tell any difference
between plugging the headset direct into soundcard and using edm-lcd
fm broadcast.

i am not a hi-fi fan. but i can tell that edm-lcd is much much better
than my friend's belkin in the quality of the sound and low noise
level. it is really worth my 172 dollars. I definitely will recommend
edm to my friends who want a real fm transmitter not a toy.

edm team, you did a great job.

frank (letter shortened)

I have been a fan of the EDM transmitters for almost 4 years.Even
though my old one was awesome the new LCD one is in a class by its
self.The extremely low noise of the unmodulated carrier is virtually
not there. Weather I use a inside antenna or outside antenna the audio
quality is unreal.

Jim

This morning I decided to test my EDM LCD, and compare it directly to the same situation if it was not through the EDM

http://coollights.blogspot.com/2008/10/edm-sound-quality-comparison-testing.html

I ran out to the car and tuned that in. wow, I couldent tell that the mp3 player itself wasnt plugged directly into the car.

When I got home I got it all set up again and I used my Sony home theater sound system (with built in fm tuner) Again I was very impressed.

Later today I went to my friends house to test the edm on his very nice sound system he has in his car. To my supprise We still coulden't tell the diffrence if it was comming directly from a mp3 player or it was being sent from the EDM

Greetings- Received the LCD in June '08 and am very happy........
Really like the unit, much better than my fm30b..........

www.radiobrandy.com/part15fm.html has a lot of good info, I found the
LCD model review which made me toss my Ramsey fm30b.

BH at gmx "real_nerggle"

I have both units, Whole House & EDM LCD.

The EDM is just completely in a different class of transmitters. The sound, quality of build, transmit distance and frequency range. They are not even comparable.

You get what you pay for with the Whole House unit and it will get the job done but, the EDM will get the job done and do it right!

Mark h2o

http://lightorama.mywowbb.com